En poursuivant votre navigation sur ce site, vous acceptez l'utilisation de cookies. Ces derniers assurent le bon fonctionnement de nos services. En savoir plus.

Remote Control Express delivers your remote control within 48 hours. 7 modes of payment. Buy safely with Remote Control Express and BNP Paribas


Remote Control MHOUSE GTX4

To open or close your automatic gate by distance, opt for the remote control model MHOUSE GTX4. Note that the model GTX4 is only compatible with engine systems of the brand MHOUSE and MOOVO.

What are the characteristics of the remote MHOUSE GTX4?

Mhouse.pngThe frequency of the remote MHOUSE GTX4 is 433.920 MHz and the model has 4 keys. The product will be shipped within 48 hours after reception of the payment. The delivered product comes with a wall bracket and suitable batteries.

The 4 buttons remotes can be used for gate systems and also for garage door automation, shutters, etc. The warranty is 3 years and if you are not satisfied with your purchase, the return and immediate refund is possible within the return period.

How to program the new remote control MHOUSE GTX4?

The remote MHOUSE is easy to program, without further technical tools. You only have to press a few buttons on the remote control. To register the new remote control, press for 5 seconds the button T1 of the new remote and let it go. For programming with a already programmed remote, press slowly 3 times button T1. That is, press 1 second, release 1 second and this 3 times. Before testing your new remote control, press one second T1 button on the new transmitter, release and wait 10 seconds.

For gate motor of MHOUSE registering a new remote control must be done on the receiver board. Depending on whether the complete opening or partial opening of the gate is required, it must be stored differently. For the full opening of the gate, press the P1 button once on the electronic control board of the engine, so that the associated LED flashes slowly.

If the partial opening is to be programmed, press 2 times the P1 button on the board so that the appropriate LED flashes slowly 2 times. Then press a button on the remote control which is to be used for this function. As a test, press any button on the new remote for 5 seconds. If the LED on the board slowly flashes 3 times, the programming was successful.

Les commentaires sont fermés.