Help Remote

To open or close your automatic gate by distance, opt for the remote control model MHOUSE GTX4. Note that the model GTX4 is only compatible with engine systems of the brand MHOUSE and MOOVO.

What are the characteristics of the remote MHOUSE GTX4?

The frequency of the remote MHOUSE GTX4 is 433.920 MHz and the model has 4 keys. The product will be shipped within 48 hours after reception of the payment. The delivered product comes with a wall bracket and suitable batteries.

The 4 buttons remotes can be used for gate systems and also for garage door automation, shutters, etc. The warranty is 3 years and if you are not satisfied with your purchase, the return and immediate refund is possible within the return period.

How to program the new remote control MHOUSE GTX4?

The remote MHOUSE is easy to program, without further technical tools. You only have to press a few buttons on the remote control. To register the new remote control, press for 5 seconds the button T1 of the new remote and let it go. For programming with a already programmed remote, press slowly 3 times button T1. That is, press 1 second, release 1 second and this 3 times. Before testing your new remote control, press one second T1 button on the new transmitter, release and wait 10 seconds.

For gate motor of MHOUSE registering a new remote control must be done on the receiver board. Depending on whether the complete opening or partial opening of the gate is required, it must be stored differently. For the full opening of the gate, press the P1 button once on the electronic control board of the engine, so that the associated LED flashes slowly.

If the partial opening is to be programmed, press 2 times the P1 button on the board so that the appropriate LED flashes slowly 2 times. Then press a button on the remote control which is to be used for this function. As a test, press any button on the new remote for 5 seconds. If the LED on the board slowly flashes 3 times, the programming was successful.

Marienfelder Antriebstechnik abbreviated Marantec is a German company that manufactures since 1960 controllers, remote controls and motors for garage doors. Marantec uses techniques from the car industry.

The properties of the remote control Marantec D302-868

The remote of Marantec from the same series are designed equal. That what makes the different is the number of channels and the frequency. The remote control Marantec D302-868 has a case of gray and black plastic and has 2 buttons. Its dimensions are 72x17x39 mm.

The frequency is 868.3 MHz and it works with CR2032 batteries. Programming is done by registering at the receiver or by copying the signal from remote to remote. A manual comes with the remote controls, so that programming is very simple.

How is the remote control Marantec D302-868 programmed?

The programming of the fob can be carried out in two ways: if you still have an old working remote, copy the signal from one remote to another or if you do not have an working remote left, register the new one directly at the receiver. In the first method, connect the two remotes with the supplied copy adapter. Now press the button of the old fob to be copied and keep it pressed.

Then press the same button on the new fob. The LED flashes and then lights up permanently. Release the buttons. Perform the same steps for the second button. After 10 seconds, the new remote control Marantec D302-868 is programmed.

For the second method press the P button on the engine several times until the LED no. 7 flashes. Now press the button on the remote control and the LED on the motor flashes quickly. Release the button, wait 10 seconds and the remote is programmed.

The Berner brand was founded by German entrepreneur Albert Berner. The company specializes in the sale of industrial supplies and tools. After five successful decades, the brand has developed by selling remote controls for gates and electronic tools.

The features of the remote control Berner BHS140

The Berner remote BHS140 is intended for doors. Reliable and robust, with its small dimensions of 70x15x40 mm and a nice design in black and gray, the fob is easy to use. Its LED is blue. The integrated code system prevents to clone the remote. The remote control works with CR2032 batteries.

It is ideal to control your gate. The transmission frequency is 868.3 MHz. The use of this fob guarantees high security at the door controller. The Berner BHS140 accompanies you everywhere and saves time when you open the door system.

How do you program the remote control Berner BHS140

To program the remote controls Berner you need to use only the 4 keys. With a pointed object press the programming button P1 on your new remote control (for BHS 110 you must use the housing of the remote control to open). The LED flashes. In the next 4 seconds, press on your new remote control button you want to program. Hold it.

The diode fixed enlightened. While holding the button, you are approaching the already programmed fob and the new remote head to head, so they only 5 mm apart. Press the same button on the already programmed fob. The LED goes out. Release the buttons. Repeat the procedure for each button you want to program. Your new remote control is programmed.