En poursuivant votre navigation sur ce site, vous acceptez l'utilisation de cookies. Ces derniers assurent le bon fonctionnement de nos services. En savoir plus.

Remote Control Express delivers your remote control within 48 hours. 7 modes of payment. Buy safely with Remote Control Express and BNP Paribas


Features of the remote control Marantec D302-868

télécommande Marantec D302-868.pngMarienfelder Antriebstechnik abbreviated Marantec is a German company that manufactures since 1960 controllers, remote controls and motors for garage doors. Marantec uses techniques from the car industry.


The properties of the remote control Marantec D302-868

The remote of Marantec from the same series are designed equal. That what makes the different is the number of channels and the frequency. The remote control Marantec D302-868 has a case of gray and black plastic and has 2 buttons. Its dimensions are 72x17x39 mm.

The frequency is 868.3 MHz and it works with CR2032 batteries. Programming is done by registering at the receiver or by copying the signal from remote to remote. A manual comes with the remote controls, so that programming is very simple.

How is the remote control Marantec D302-868 programmed?

The programming of the fob can be carried out in two ways: if you still have an old working remote, copy the signal from one remote to another or if you do not have an working remote left, register the new one directly at the receiver. In the first method, connect the two remotes with the supplied copy adapter. Now press the button of the old fob to be copied and keep it pressed.

Then press the same button on the new fob. The LED flashes and then lights up permanently. Release the buttons. Perform the same steps for the second button. After 10 seconds, the new remote control Marantec D302-868 is programmed.

For the second method press the P button on the engine several times until the LED no. 7 flashes. Now press the button on the remote control and the LED on the motor flashes quickly. Release the button, wait 10 seconds and the remote is programmed.


Features of the remote Berner BHS140

Berner.pngThe Berner brand was founded by German entrepreneur Albert Berner. The company specializes in the sale of industrial supplies and tools. After five successful decades, the brand has developed by selling remote controls for gates and electronic tools.




The features of the remote control Berner BHS140

The Berner remote BHS140 is intended for doors. Reliable and robust, with its small dimensions of 70x15x40 mm and a nice design in black and gray, the fob is easy to use. Its LED is blue. The integrated code system prevents to clone the remote. The remote control works with CR2032 batteries.

It is ideal to control your gate. The transmission frequency is 868.3 MHz. The use of this fob guarantees high security at the door controller. The Berner BHS140 accompanies you everywhere and saves time when you open the door system.

How do you program the remote control Berner BHS140

To program the remote controls Berner you need to use only the 4 keys. With a pointed object press the programming button P1 on your new remote control (for BHS 110 you must use the housing of the remote control to open). The LED flashes. In the next 4 seconds, press on your new remote control button you want to program. Hold it.

The diode fixed enlightened. While holding the button, you are approaching the already programmed fob and the new remote head to head, so they only 5 mm apart. Press the same button on the already programmed fob. The LED goes out. Release the buttons. Repeat the procedure for each button you want to program. Your new remote control is programmed.


Characteristics of the remote control BFT TO2

BFT_LOGO.jpgThe Italian company BFT is specialized in the production of engines and controls for gates, garage doors, community gates and industrial doors.


The properties of the BFT TO2

The remote control BFT TO2 has a small size (dimensions: 82x18x44 mm) for easy use.

Its design is different from other remote controls for the automation of gates and doors. Both buttons are located on the left side. The logo of the brand BFT is displayed on the bottom and right at the front of the remote control. This model is not compatible with the remote controls BFT VTM2 and BFT TX2F. The frequency is 30.875 MHz and the coding is simple because it is a system with DIP switches (20). He works with LR23A type 12V batteries.

How to program the BFT TO2 remote

The programming of the remote control for BFT TO2 systems is very easy. You only need to code them as on the old remote of the same brand. In the remotes place the internal mini switch.To do so, take both remotes, the old and the new remote.

Just open the already-programmed remote control and the new one. To program it use a screwdriver to the lace the small DIP switches on the new remote in the same position as on the old. Then simply close them again and the BFT TO2 works. In order to simplify the programming, we always put in a manual.